ThreadChecker™
Ships from stock – same or next day shipping
Call: (800) 552-6267
Non-contact application-specific sensors designed to check
threadpresence/absence displacement sensing system
- Universal electronics for any probe/material combination
- Four internal probes from 4mm to 10mm
- Two external probes: 6mm and 8mm
- DIN rail mounting option
- CE compliant
- IP-67 rated probes and electronics
- PUR jacketed probe and I/O cables
- Go/no-go LED indicator
- Push button teach
- Both switched and analog outputs
| TEMPERATURE | |
| Operating range | 0° to 70°C (32° to 158°F) |
| Storage range | 0° to 70°C (32° to 158°F) |
| Compensation range | 15° to 55°C (59° to 131°F) |
| ANALOG OUTPUT | |
| Continuous load current | <50 ma |
| Short circuit/overload protection | Yes |
| INPUT | |
| Supply voltage required | 15 to 30 Vdc |
| Current limit (no load current input) | <50 ma |
| Reverse polarity protection | Yes |
| Short circuit protection | Yes |
| SWITCHED OUTPUT | |
| Type | Opto-isolated NPN |
| Switching speed | 3 KHz |
| Maximum voltage | 30 Vdc |
| Maximum current | 80 mA |
| RATINGS | |
| Sensors | IP-67 |
| Electronics | IP-67 |
| CE compliant | Yes |
| SENSOR CABLE |
|
| Jacket material | Polyurethane |
| Length | 2 meters |
| INDICATORS |
|
| Power on | Green LED |
| Thread presenceOff = unthreaded hole detected On = threaded hole detected* Blinking = Teach mode | Yellow LED |
Universal ThreadChecker™
Non-contact proximity measuring system
Kaman Precision Products
Measuring & Memory Systems
217 Smith Street
Middletown, CT 06457
USA
Telephone 860-632-1000
Fax 860-632-4515
Council Directive 2004/108/EC (December 15, 2004) on Electromagnetic Compatibility (EMC Directive)
Council Directive 2006/95/EC (December 12, 2006) on Low Voltage Equipment Safety (LVD Directive)
EN 61326-1:2006 – Industrial Electrical equipment for Measurement, Control and Laboratory Use – EMC Requirements
EN 55011:2007 – Class A Group 2 Radiated Emissions Requirements
EN 61010-1:2001 The ThreadChecker unit requires the use of a limited energy power supply circuit per EN 61010-1:2001 Article 9.3. The ThreadChecker does not use or switch voltages in excess of 60 VDC or 42.4 VAC peak (30 VAC rms).
